|
|
Click on either of the above images to see more views of the TransWarP 9
|
| Shipping Location |
|
Notes:
- 9.25" diameter, series wound DC motor - same basic size as WarP 9
- 1.370", 32 tooth, hardened and splined shaft on the DE that matches a Turbo 400 slip-yoke and universal assembly
- 1.125" diameter tailshaft
- Advanced timing (for counter-clockwise rotation when viewed from the transmission, CCWDE)
- Contact us if your motor rotates clockwise when viewed from the transmission (e.g. for some Honda vehicles)
- Shipping/handling added at time of checkout (based on shipping location selected above):
$265
|
TransWarP 9 Motor |
Slip-Yoke Assembly |
Tailshaft Housing |
#301-00-08309
Status: Ships in 4-7 Days
|
#301-1350SYA
Status: Ships in 4-7 Days
|
#301-T400STS
Status: Ships in 4-7 Days
|
Note: All three of the above elements are usually required for a TransWarP 9 application. |
Technical Information:
- The same mounting pattern as a WarP 9 or an ADC 9” motor
- HP = 70 @ 120 Volts DC (435 Amps)
- 116 Ft. pounds torque
- Weight, approx. 143 pounds
- 5500 RPM
- Exceeds class "H" insulation standard
- S1, S2, A1, A2 connections have been moved to the side to allow additional clearance above, and avoid damage if they are in a downward position
- 8 mounting holes on the commutator end rather than the typical 4, allowing for a mounting
bracket, as well as addition of "appliances" like an air conditioner or alternator.
- The CE shaft has been increased to 1.125" to match the DE of a typical WarP 9. This allows for insane torque capabilities by connecting the TransWarP 9 in series with a WarP 9.
Component layout description:
|
|
|
|
Product Finder - Top-Line Shop
Good Reading
|
|