|
|
|
PFC-50 Series |
|
Installation Manual
Installation Manual
AC Current Meter (Ammeter)
If you'd like to easily see how much current your charger is drawing from the wall, click HERE to view our digital ammeter! |
This charger is HOT! It is power factor corrected and designed to either
put out 50 amps (if the battery voltage is lower than the input voltage) or
draw 50 amps from the line (if the line voltage is lower than the battery
voltage.) The buck enhancement option allows over 75 amps out!
The PFC-50 is designed to charge any battery pack from 12 volts to 360 volts
nominal (14.4 to 420 peak.) The charger will operate from any voltage
from 60 to 250 volts AC at either 50 or 60 Hz. The charger has a
throttle knob to allow the user to turn the current down when using
shared or undersized circuits. This charger is designed to operate at
full capacity from a 50 Amp circuit.
The PFC50 weighs 42 pounds and resides in a box that is 19.5 x 10.5 x 6.5 inches.
The charger comes with an Anderson SB-75 connector on the output (DC) cable. A mating SB-75 can be purchased on the Anderson Connector page.
Shipping charge is $75 within the US on these chargers.
Additional info. on the PFC-50 from manufacturer's site
PFC-50 Manual 
|
Standard w/ Ammeter
#501-PFC50
(AC current meter now included!)
|
With Buck Enhancement
#501-PFC50B |
Standard w/ Multi-Function Meter
#501-PFC50M
(AC current meter now included!) |
With Buck Enhancement and Multi-Function Meter
#501-PFC50BM |
|