Kit includes:
-12VDC pump
-Water reservoir w/ 2 heating elements
-12VDC contactor
-8 feet of tubing
-all fittings, clamps required to install
|
The extreme convenience required to install this in-line water heater makes the higher cost seem trivial. This system easily adapts to the original water heater system that comes with internal combustion vehicles. Removing the dash, tearing into the firewall, and making a custom mounting bracket are things of the past with this heater. Simply mount the components in the engine compartment and route the heater hose to the original heater lines in the vehicle. The heater has two elements which control power dissipation (heating capacity). The thermostat on these elements is generally set to 190 F.
Reservoir Dimensions: 8.5 x 4 x 2"
Power specifications:
Input Voltage: 120-156V
Warm (1 element): 1500-1750 Watts
Hot (2 elements): 3000-3150 Watts
#131-ILH-2
Stock: 1
|
Kit includes:
-12VDC pump
-Water reservoir w/ 1 heating elements
-12VDC contactor
-8 feet of tubing
-all fittings, clamps required to install
|
This heater has the added convenience of the dual element heater above, but at a lower cost since it only uses one element. The thermostat on these elements is generally set to 190 F.
Reservoir Dimensions: 8.5 x 2 x 2"
Power Requirement:
Input Voltage: 120-156V
Warm: 1500-1750 Watts
#131-ILH-1
|