Loading

    Choose a Category     Good Reading

Cabling Tools/Accessories/Supplies

All of the tools on this page are eligible for our tool rental policy. If you'd like to permanently add the tools to your tool chest, simply keep them! Otherwise, as long as we still carry the tools, return them when you're finished (must be within 60 days for full refund) and you'll be promptly refunded for the full purchase price (not including any shipping/handling charges or returns after 60 days, which have a 5% restocking fee). Note: All of the tools sold on this page are either new or used, but shipped in good cosmetic and functional condition.


Hydraulic Handheld Crimper with 6/0 - 6AWG Dies

This hydraulic crimper will crimp cable terminations from 6 to 6/0 AWG. Crimper comes with interchangeable dies and replacement O-rings. Crimping is simplified by the hydraulic pumping action, which applies several tons of force to the dies. Everything you see here is included. This model's design allows for easy removal of the crimping dies.

The lead time on this unit is approx. 2 weeks.


$198.88

#601-YQK-240


Heavy Duty Handheld Crimper with 4/0 - 6AWG Dies

This heavy duty crimper will crimp cable terminations from 6 to 4/0 AWG. Crimper comes with interchangeable dies. Everything you see here is included. This model's design allows for easy changing of the crimping dies.


$231.00

#600-6-250-DHC


EcoHeat Heat Gun

The EcoHeat heatgun has the following features:

  • 2 Heat Settings 500°F and 1000°F
  • Lightweight
  • Attachments: 7/8" reducer, shrink tubing reflector, 1 5/16" spreader, and 3 1/8" spreader

$61.88

#600-0004


Cable Cutters, Up To 6/0

This cutter is the tool for the job if you're cutting 6/0 or larger copper or aluminum cable. Additionally, it has the following features:

  • Cuts soft copper and aluminum cable up to 6/0
  • Hook-jaw blades grab and hold cable
  • Shear cutting action makes clean cuts
  • Steel handles with red vinyl grips
  • Jaws are drop-forged steel with black-oxide finish
  • Beveled tips assure positive mating
  • Designed to maintain proper blade tension

$120.99

#601-HS-250


Klein 16 3/4" Utility Cable Cutter

Klein Tools are the finest quality you will find for your electric vehicle needs. This cutter is the tool for the job if you're cutting 4/0 or larger copper or aluminum cable (up to 350MCM). Additionally, it has the following features:

  • Cuts soft copper and aluminum cable up to 350MCM (much larger than 4/0)
  • Hook-jaw blades grab and hold cable
  • Shear cutting action makes clean cuts
  • Steel handles with red vinyl grips
  • Jaws are drop-forged steel with black-oxide finish
  • Beveled tips assure positive mating
  • Designed to maintain proper blade tension

$109.99

#601-63035


QuickCable Sheathing Stripper

This tool makes stripping the sheathing off of wire and cable super-easy. It will work with wire/cable sizes from 10 gauge to 4/0.

A spare blade is included in the handle.


$27.88

#601-4215-001


Hammer Crimper

 

This tool provides an inexpensive way to make crimps on sizes from 8 gauge to 4/0. It can be used with a hammer, vise, or press.

A spring-loaded pin locks the striker in the up position while loading the cable and connector.

Note: Always wear safety glasses when using this or any other striking tool!


$35.00

#601-4266-001


NoAlox Joint Compound

NoAlox is intended for use on aluminum or copper electrical joints. It creates a barrier against corrosion. Can be used in lugs and terminals, as well as on the battery posts. Comes in a 2oz. container.


$4.88

#600-0001-2


U-Barrel Crimpers

These U-Barrel crimpers are an affordable, high quality solution to crimp pins for connectors such as the Deutsch connectors. The tool is built solid, and has comfortable, ergonomic handles. Makes a wonderful addition to your toolbox allowing you to crimp on a high-quality connectors in your applications.


$27.99

#601-419

2012 www.evsource.com
Logan, Utah USA